Search
$0.00Cart (0)
  • 1
  • 2
  • 3
Congrats!

Congrats!

Congratulations to David Johnson on picking up the win in his new B mod!

All-new website for B2 Racing Components! Shop by departments, brands, and be sure to check out our featured items!

Paden Phillips Wins Lucas Oil Speedway Mid-Season

Paden Phillips Wins Lucas Oil Speedway Mid-Season

Paden Phillips Wins Lucas Oil Speedway Mid-Season

Latest News From B2 Race Components

We are Here to Help!

We are Here to Help!

10/16/2020
If you...more
Project time!

Project time!

4/1/2020
With...more
2019 PRI Show

2019 PRI Show

12/13/2019
PRI is...more

Featured Brands

Longacre Racing Products
MSD IGNITION SYSTEMS
AERO WHEELS
Rod End Supply
Eibach
RCI SAFETY

Electrical

MSD 8471 Chevy Bronze Distributor Drive Gears

MSD 8471 Chevy Bronze Distributor Drive Gears

Item # 547-8471

| Bronze distributor drive gears for Small Block and Big Block Chevy and V6 Chevy | 0.50"" Diameter Shaft | AMPCO 45 Aluminum Bronze Containing 5% Nickel | Less Prone to Wear | Does Not Harm Cam | Small Block Chevy or Big Block Chevy or V6 Chevy |

$55.95
Details
ALLSTAR DISTRIBUTOR GEAR BRONZE .500IN

ALLSTAR DISTRIBUTOR GEAR BRONZE .500IN

Item # ALL81311

| ALLSTAR DISTRIBUTOR GEAR BRONZE 0.500" | Replacement roll pin available #ALL81315, $1.19, 3/16"x7/8" |msd distributor gear

$31.95
Details
ALLSTAR DISTRIBUTOR GEAR BRONZE .491IN

ALLSTAR DISTRIBUTOR GEAR BRONZE .491IN

Item # ALL81310

| ALLSTAR DISTRIBUTOR GEAR BRONZE .491" | Replacement roll pin available, ALL81310, $1.19 |

$31.95
Details
MSD 8727CT Digital Soft-Touch HEI Rev Control Limiter for Circle Track

MSD 8727CT Digital Soft-Touch HEI Rev Control Limiter for Circle Track

Item # 547-8727

| MSD is excited to bring this HEI Rev Limiter to the circle track world. This Circle Track RPM Control is designed for racers and tech officials alike. It features fully digital operation allowing for extra smooth and accurate rev limiting to within a quarter percent of the set value, while eliminating the need for plug-in RPM modules, as convenient adjustable rotary dial’s take their place |

| A bright LED display clearly indicates the set RPM rev limit | Easy plug-in wiring and connectors allow the unit to plug directly into any HEI-style distributor with no cutting or crimping of wires | HEI Rev Limiter is epoxy filled, making it resistant to the extreme conditions circle track racing presents including water, mud, engine fluids and of course vibration | The epoxy is also in place so that tampering with the internal circuitry becomes a thing of the past |

| New digital technology also allows the rev limiter to record the highest RPM the engine rev limited for a pre-determined amount of time providing useful information to both race teams and tech officials 
If for any reason the unit loses any connection during a race, the engine will lose power and set a fault code that will be displayed on the LED display |

| Approved for use in both IMCA and USRA | Fully digital operation allows for accurate rev limiting | Rotary dials eliminate the need for plug in RPM modules | Easy installation to any HEI distributor with plug-in wiring harness and connectors | Harness also available for second car or ignition system when switching rev limeter between cars 547-ASY26434 | Epoxy filled for extreme racing conditions and eliminates tampering with circuitry |

$169.95
Details
MSD 8728 Soft Touch Rev Limiter Control for HEI

MSD 8728 Soft Touch Rev Limiter Control for HEI

Item # 547-8728

| The Soft Touch Rev Control, PN 8728, is designed to be used on standard points ignition or inductive ignition systems. This means that the PN 8728 can be installed on engines with a GM HEI Ignition, Ford or Chrysler electronic ignition, any standard breaker points systems or even with an MSD 5 or Blaster Ignition (non-CD ignitions). The RPM Limiter is adjusted with plug-in modules and is supplied with 6,000, 7,000 and 8,000 rpm modules. When the engine reaches your set rpm, the Soft Touch circuitry kicks in and drops the spark to certain cylinders. This rpm limiter produces very accurate and smooth, backfire-free rev limits |

| Can be used on 4, 6 or 8-cylinder engines with inductive ignitions | Adjusted with plug-in modules | Includes 6,000, 7,000 and 8,000 rpm modules | No MSD ignition control box required |

$144.95
Details
MSD RPM Pill Module Chips

MSD RPM Pill Module Chips

Item # 910-12620-Size

| You can easily change the RPM limit on your MSD ignition box by switching RPM modules | Various RPM's available between 6200-8500 |

$9.95
Details
MSD 8207 Blaster SS Coil

MSD 8207 Blaster SS Coil

Item # 547-8207

| Don’t let the compact size of the Blaster SS Coil fool you, because it is packed with performance! The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output. In fact, when used with an MSD 6 Series Ignition, the Blaster SS produces 300 milliamps with a maximum voltage output of 40,000 volts! The secondary windings are wound on a segmented bobbin which reduces the chance of voltage breakdown between the primary and secondary windings. For more protection, these windings are encased in a polyurethane compound for complete protection against vibration. The Blaster SS features brass terminals and a sturdy Rynite housing. It is supplied with a 90° boot, terminal and vibration mounts. A great addition to CD Ignitions and some stock applications |

| Improved output coil for electronic ignitions, and MSD Ignitions | Efficient winding design and assembly creates a compact housing | Primary and secondary windings are encased in Ciba polyurethane | 70:1 turns ratio and lower primary resistance produce high voltage output | Dupont Rynite housing with a tall tower and brass primary terminals |

$54.95
Details
MSD 8253 HVC II Coil for 6 Series Ignitions

MSD 8253 HVC II Coil for 6 Series Ignitions

Item # 547-8253

| The latest coil to be built entirely in-house at MSD is designed to be used with MSD 6 Series Ignition Controls. This coil utilizes an iron U-Core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from a special Dupont Rynite material and wound specifically to produce the most current possible with incredible voltage and lightning quick rise time. The blue housing is also molded from high dielectric Rynite material. The brass primary terminals are spaced far apart and the secondary tower is well protected for increased spark isolation. The housing is completely potted with an epoxy compound for vibration resistance and installs with sturdy vibration mounts |

| Designed for high rpm, long duration applications using MSD 6 Series Ignitions | New U-core winding design produces more voltage and current | 100:1 turns ratio and lower primary resistance produce high voltage output | Windings are encased in fracture resistant compound for vibration resistance | Dupont Rynite housing with isolated tower and brass primary terminals | Supplied with rubber shock mounts |

$209.95
Details
MSD 8261 HVC II Coil for 7 Series Ignitions

MSD 8261 HVC II Coil for 7 Series Ignitions

Item # 547-8261

| The Pro Power HVC II Coil is completely built in-house at MSD so engineers have exclusive control over the performance and qual­ity. The coil utilizes an iron U-Core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from Dupont Rynite FR946 material which has incredible dielectric capabilities at high temperatures. MSD also incorporated a cutting edge winding material that has an improved insulation and is also capable of enduring extreme volt­ages. Together, these materials create a durable coil with incredible voltage capabilities, lightning quick rise time and lengthy spark duration. The housing, also molded from Rynite material, features far spaced brass primary terminals and a well protected secondary tower for increased spark isolation. The housing is completely potted with an epoxy compound for vibration resistance and installs with sturdy vibration mounts | For use with MSD 7 and 8 Series Ignitions |

| Designed for racing applications with an MSD 7 Series Ignition Control | New U-core winding design produces more voltage and current | 70:1 turns ratio and lower primary resistance produce high voltage output | Windings are encased in fracture resistant compound for vibration resistance | Dupont Rynite housing with isolated tower and brass primary terminals | Supplied with rubber shock mounts |

$218.95
Details
MSD 8222 Blaster 2 Coil High Vibration

MSD 8222 Blaster 2 Coil High Vibration

Item # 547-8222

| In applications such as off-road, marine or other harsh conditions, the MSD Blaster High Vibration Coil is the best choice. The sturdy metal housing of the High Vibration Coil is completely pot­ted with a premium grade epoxy to completely encase the coil’s primary and secondary windings. This protects the coil’s internal components from high and low frequency vibrations that are commonly experienced in racing |

| Metal canister is encased with epoxy to protect the windings from high vibration applications | Improved output coil for electronic ignitions, and MSD Ignitions (ballast resistor required for points) | 100:1 turns ratio and lower primary resistance produce high voltage output |

$53.95
Details

About B2 Race Components

We have the hard core race parts you demand. We specialize in bringing the racer the best race parts available on the market. B2 Race Components is constantly updating and keeping up with the latest in new racing technology.

Contact Us