Search
$0.00Cart (0)
  • 1
  • 2
  • 3
Congrats!

Congrats!

Congratulations to David Johnson on picking up the win in his new B mod!

All-new website for B2 Racing Components! Shop by departments, brands, and be sure to check out our featured items!

Paden Phillips Wins Lucas Oil Speedway Mid-Season

Paden Phillips Wins Lucas Oil Speedway Mid-Season

Paden Phillips Wins Lucas Oil Speedway Mid-Season

Latest News From B2 Race Components

We are Here to Help!

We are Here to Help!

10/16/2020
If you...more
Project time!

Project time!

4/1/2020
With...more
2019 PRI Show

2019 PRI Show

12/13/2019
PRI is...more

Featured Brands

Eibach
RED LINE
Hypercoil
Hoosier
Rod End Supply
WEHRS

Ignition

MSD 6430 Extreme Duty 6ALN CDI Ignition Control

MSD 6430 Extreme Duty 6ALN CDI Ignition Control

Item # MSD6430

| Originally designed with NASCAR in mind, the 6ALN CDI ingnition control box is equipped with the mandatory 6-Pin Weathertight connector to meet NASCARs ignition wiring rule, 20-6.1. Plus, a special clear base plate is also installed for easy tech inspection | The 6ALN has a built-in Rev Control | These rev controls are adjustable with plug-in modules and will save your engine from over-rev damage caused by missed shifts or driveline failure | Multiple spark, capacitive discharge ignition control | Designed for circle track racing with NASCAR mandated connectors and clear epoxy potting compound for vibration protection | Circuit board is encased in a clear two part silicone elastomer | Clear plastic base plate for easy tech inspection |

| Built-in Soft Touch Rev Control is adjustable with RPM Modules | Multiple sparks for 20 degrees of crankshaft rotation | Works on 12 - 18 volt electrical system | Accepts breaker points, amplifier and magnetic pickup trigger inputs | 470 primary voltage output to coil | Programmable for 4, 6, or 8-cylinders by cutting red/blue wire loops |

| Supplied with rubber shock mounts | Supplied with 3,000, 6,000, 7,000 & 8,000 RPM Modules |

$349.95
Details
MSD 8728 Soft Touch Rev Limiter Control for HEI

MSD 8728 Soft Touch Rev Limiter Control for HEI

Item # 547-8728

| The Soft Touch Rev Control, PN 8728, is designed to be used on standard points ignition or inductive ignition systems. This means that the PN 8728 can be installed on engines with a GM HEI Ignition, Ford or Chrysler electronic ignition, any standard breaker points systems or even with an MSD 5 or Blaster Ignition (non-CD ignitions). The RPM Limiter is adjusted with plug-in modules and is supplied with 6,000, 7,000 and 8,000 rpm modules. When the engine reaches your set rpm, the Soft Touch circuitry kicks in and drops the spark to certain cylinders. This rpm limiter produces very accurate and smooth, backfire-free rev limits |

| Can be used on 4, 6 or 8-cylinder engines with inductive ignitions | Adjusted with plug-in modules | Includes 6,000, 7,000 and 8,000 rpm modules | No MSD ignition control box required |

$144.95
Details
MSD 8222 Blaster 2 Coil High Vibration

MSD 8222 Blaster 2 Coil High Vibration

Item # 547-8222

| In applications such as off-road, marine or other harsh conditions, the MSD Blaster High Vibration Coil is the best choice. The sturdy metal housing of the High Vibration Coil is completely pot­ted with a premium grade epoxy to completely encase the coil’s primary and secondary windings. This protects the coil’s internal components from high and low frequency vibrations that are commonly experienced in racing |

| Metal canister is encased with epoxy to protect the windings from high vibration applications | Improved output coil for electronic ignitions, and MSD Ignitions (ballast resistor required for points) | 100:1 turns ratio and lower primary resistance produce high voltage output |

$53.95
Details
MSD 8202 Blaster 2 Ignition Coil

MSD 8202 Blaster 2 Ignition Coil

Item # 547-8202

| If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD ignition, the Blaster Coil line is the right choice. Special 100:1 windings, kept cool in an oil filled metal canister, are used to provide maximum build-up of voltage.  The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Can be used with a stock ignition, Blaster Ignition, or MSD 5, 6 or 7 Ignition Control |

| For use with stock or MSD electronic ignitions. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.  Mallory Unilite applications also require the ballast resistor | Improved output coil for stock points or electronic ignitions, Blaster Ignition, or MSD 5, 6, and 7 Series (ballast resistor required for points) | 100:1 turns ratio and lower primary resistance produce high voltage output |

| MSD Red metal canister is filled with a premium grade oil for cooling |

$48.95
Details
MSD 85561 Chevy Billet Distributor with Slip Collar

MSD 85561 Chevy Billet Distributor with Slip Collar

Item # 547-85561

| HEI | Mechanical Advance | Magnetic Trigger | Steel Gear | Ignition Box Required | No Mechanical Tach Drive | Slip Collar | Billet Aluminum Housing, Natural Finish | MFG. Part #85561 |

If you have a slightly taller block or have decked the heads, the distance between the distributor mounting pad and the cam gear/oil pump drive may be different. MSD offers these Distributor with an adjustable slip collar with 1.5” of adjustment so you can be sure the distributor is installed correctly. The distributor shares the same features of the standard Pro-Billet Chevrolet model including a ball bearing guide, long sintered lower bushing, oil seal, and an adjustable mechanical advance assembly. The maintenance-free magnetic pick-up in the billet base of the distributor triggers the MSD CD Ignition box (not included). Fits Small Block or Big Block Chevy V8.

CNC machined billet aluminum housing and billet aluminum base
Easy-to-adjust mechanical advance with supplied springs and stop bushings

Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the RPM range
Polished steel shaft is QPQ coated and guided by a sealed ball bearing and extra long sintered bushing
Advance plate and weights are fine blanked from Chromoly steel and QPQ coated for friction reduction
Mechanical advance assembly can be locked out for crank trigger systems
Advance weight pins are staked and tig welded to the plate
Nylon pads ensure smooth operation of the advance weights
Special oil tract improves lubrication to the distributor and cam gear
O-ring seals can be added to modified blocks to improve oil pressure control
Supplied with an HEI style distributor cap and rotor (accepts MSD Cap-A-Dapts)

Must be used with a CD Ignition Control (MSD 6, 7, 8 or 10 Series).
Will not accept a vacuum advance canister.
Designed for racing blocks with maximum increased deck height such as Alan Root, Merlin and Rocket Blocks.

| Cap has HEI-style terminals | Slip collar has 1.5" of adjustment | Iron distributor gear |

$309.95
Details
MSD 85551 Chevy Billet Distributor

MSD 85551 Chevy Billet Distributor

Item # 547-85551

| HEI | Magnetic Trigger | Single Trigger Sensors | Iron Gear | Red Distributor Cap | Ignition Box Required | No Mechanical Tach Drive | No Slip Collar | Billet Aluminum Housing | Natural Finish | Part #85551 |

You can't go wrong with the best selling MSD Billet Distributor! The housing is machined from a billet of 6061-T6 aluminum on a state-of-the-art CNC machine producing exact tolerances. For high rpm stability, a .500” steel shaft is supported by a sealed ball bearing and a long sintered bushing. This shaft also receives a QPQ coating for friction reduction and resistance to corrosion. A precision machined reluctor is attached to the shaft which triggers the magnetic pick-up mounted in the housing. This high output magnetic pick-up is the most accurate way to trigger your ignition. Plus, with no moving parts to wear or adjust, the pick-up is maintenance free! Just above the pick-up is MSD’s adjustable mechanical advance assembly. Different springs and stop bushings are supplied so you can tune an advance curve to match your application.

| Fits Small Block or Big Block Chevy V8 |

| Must be used with a CD Ignition Control (MSD 6, 7, 8 or 10 Series) | Will not accept a vacuum advance canister | CNC machined billet aluminum housing and billet aluminum base | Easy-to-adjust mechanical advance with supplied springs and stop bushings | Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the RPM range | Polished steel shaft is QPQ coated and guided by a sealed ball bearing and extra long sintered bushing | Advance plate and weights are fine blanked from Chromoly steel and QPQ coated for friction reduction | Mechanical advance assembly can be locked out for crank trigger systems | Advance weight pins are staked and tig welded to the plate | Nylon pads ensure smooth operation of the advance weights | Special oil tract improves lubrication to the distributor and cam gear | | O-ring seals can be added to modified blocks to improve oil pressure control | Supplied with an HEI style distributor cap and rotor (accepts MSD Cap-A-Dapts) | Iron distributor gear |

$264.95
Details
MSD 85501 Chevy V8 Pro-Billet Distributor, Locked-Out Timing

MSD 85501 Chevy V8 Pro-Billet Distributor, Locked-Out Timing

Item # 547-85501

| HEI | No Advance | Magnetic Trigger | Bronze Gear | Red Distributor Cap | Ignition Box is Required | No Mechanical Tach Drive | Slip Collar | Billet Aluminum Housing Material | Natural Finish | MFG. Part #85501 |

This strong, billet aluminum distributor is set up for engines that run locked-out timing or an MSD Timing Computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft while an extra long sintered bushing stabilizes the lower portion. Trigger signals are produced via a high-output magnetic pick-up. This pickup is extremely accurate and never requires adjustment. Since this distributor is designed primarily for race engines, an oversized (.006”) bronze gear is installed along with an adjustable slip collar for modified blocks, heads or intake manifolds.

|Designed primarily for race applications with no mechanical advance | Ideal for the 604 Crate Engine application | CNC machined billet aluminum housing and billet aluminum base | Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range Adjustable slip collar mounting flange for engines with modified deck heights | Polished steel shaft is QPQ coated and guided by a sealed ball bearing | Special oil tract improves lubrication to the distributor and cam gear | O-ring seals can be added to modified blocks to improve oil pressure control | Supplied with a 0.006” oversized bronze gear installed | Supplied with an HEI style distributor cap and rotor (accepts Cap-A-Dapts) | Must be used with an MSD 6, 7, 8, or 10 Series Ignition | Will not accept a vacuum advance canister | Must be used with an MSD 6, 7, 8 or 10 Series Ignition | Locked-out Timing from the factory |

Adjustable slip collar allows you to adjust the distributors height. This is great for engines with modified intakes and deck heights

$308.95
Details
MSD 85783 Black Pro-Billet Distributor, Ford 351W

MSD 85783 Black Pro-Billet Distributor, Ford 351W

Item # 547-85783

| HEI | Mechanical Advance | Magnetic Trigger | Single Trigger Sensor | Iron Gear | Black Distributor Cap | Ignition Box Required | No Mechanical Tach Drive | No Slip Collar | Billet Aluminum Housing Material | Black Anodized Housing | California EO Approved | Small base diameter for extra clearance |

Fits Ford 351W

MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001”. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.

| Must be used with an MSD Ignition Control | Polished steel shaft is QPQ coated and guided by a sealed ball bearing for smooth operation at all rpms | Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range | CNC machined billet aluminum housing and billet aluminum base providing superior strength and great looks | Easy-to-adjust mechanical advance with supplied springs and stop bushings (except locked out versions) | Advance plate and weights are fine blanked from chrome moly steel and QPQ coated for friction reduction | Advance weight pins are staked and tig welded to the plate | Nylon pads ensure smooth operation of the advance weights | Mechanical advance assembly can be locked out for crank trigger systems or racing applications | Vacuum advance canister for improved economy (can be locked out) | Fits 351W Ford |

$324.95
Details
MSD 8471 Chevy Bronze Distributor Drive Gears

MSD 8471 Chevy Bronze Distributor Drive Gears

Item # 547-8471

| Bronze distributor drive gears for Small Block and Big Block Chevy and V6 Chevy | 0.50"" Diameter Shaft | AMPCO 45 Aluminum Bronze Containing 5% Nickel | Less Prone to Wear | Does Not Harm Cam | Small Block Chevy or Big Block Chevy or V6 Chevy |

$55.95
Details
ALLSTAR DISTRIBUTOR GEAR BRONZE .500IN

ALLSTAR DISTRIBUTOR GEAR BRONZE .500IN

Item # ALL81311

| ALLSTAR DISTRIBUTOR GEAR BRONZE 0.500" | Replacement roll pin available #ALL81315, $1.19, 3/16"x7/8" |msd distributor gear

$31.95
Details

About B2 Race Components

We have the hard core race parts you demand. We specialize in bringing the racer the best race parts available on the market. B2 Race Components is constantly updating and keeping up with the latest in new racing technology.

Contact Us