Steering

Info
Steel 16mm-1.5 IFM power steering box to -6 AN hose adapter fitting.
Note: Inverted flare are used on most GM steering boxes through 1977. O-ring fittings are used later model GM metric boxes from 1978-up.
Item Details
Fits most 1980-Up GM power steering boxes with o-ring fittings.

Info
Steel 14mm-1.5 IFM power steering box to -6 AN hose adapter fitting.
Note: Inverted flare are used on most GM steering boxes through 1977. O-ring fittings are used later model GM metric boxes from 1978-up.
Item Details
Fits most 1980-Up GM power steering boxes with o-ring fittings.

Super lightweight 15" Pro-Grip aluminum steering wheels feature three spokes and have both 1/4" and 5/16" bolt mounting holes. Pro-Grip wheels have BIG 1-1/4" diameter rims allowing for a firm, comfortable grip. The welded finger nubs on the back are spaced 1" apart for additional grip.
Has a 3" dish.

Super lightweight 15" Pro-Grip aluminum steering wheels feature three spokes and have both 1/4" and 5/16" bolt mounting holes. Pro-Grip wheels have BIG 1-1/4" diameter rims with an outside diameter of 14-1/2". The welded finger nubs on the back are spaced 1" apart for a secure grip. Flat style (no dish).

This push button quick-release features a billet aluminum hub and one-piece steel sleeve. No pins, just push the button to remove wheel from shaft. Purple anodized.
Each includes a hub and weld-on sleeve for 3/4" O.D. steering shaft. Bolt holes for mounting steering wheel are 1/4"-20 course thread

Forged steel 3/4" 36-spline to 3/4" round weld-on steering U-joint.
The overall length of this steering universal joint is 3-3/4".

If you have ever crashed hard, you know the steering column can leave a big dent in your chest. These collapsible steering columns are not only safer, but much easier to install. Includes easy-install steering wheel disconnect and 3/4" mounting rod end. Adjustable from 32" to 42" in length.
Specs
32 to 42” column measured from the end of the shaft to the base of the quick release hub
Quick release hub adds an additional 2” to the overall length
O.D. of the main body is 1.125"
O.D. of the bottom shaft is .750 and 20 spline
Splined end accepts a variety of U-joint for attachment to your steering shaft or gear
O.D. of the main hub sleeve is 2.525”
O.D. of the hub sleeve flange is 3.17”
Centerline of column to end of threads on ¾” heim mount is 3”
Heim mount is adjustable forward/rearward to suit customers mounting requirements

If you have ever crashed hard, you know the steering column can leave a big dent in your chest. These collapsible steering columns are not only safer, but much easier to install. Includes easy-install steering wheel disconnect and 3/4" mounting rod end. Adjustable from 22-1/2" to 32" in length.
Specs
22-½ to 32” column measured from the end of the shaft to the base of the quick release hub
Quick release hub adds an additional 2” to the overall length
O.D. of the main body is 1.125"
O.D. of the bottom shaft is .750 and 20 spline
Splined end accepts a variety of U-joint for attachment to your steering shaft or gear
O.D. of the main hub sleeve is 2.525”
O.D. of the hub sleeve flange is 3.17”
Centerline of column to end of threads on ¾” heim mount is 3”
Heim mount is adjustable forward/rearward to suit customers mounting requirements

These bearings have a .757" ID to slip over your 3/4" steering shaft and are in a lightweight aluminum bracket to allow easy installation of your firewall.
From center of bearing to center of mounting hole is 1.456" or approximately 1-1/2". This produces about a 3" mounting circle for the 3 mounting holes